Workhorse

This is my first Workhorse liner. I have skied several different zip liners over the years, both neoprene and leather versions, depending on my boot and the fit. The workhorse filled up my new Tecnica Firebird 110/93 last the best. I originally looked for a Free-ride in a 22.5 as that interfaces with the back of my boot the best, but they were sold out. The Workhorse is the same fill and upper but leather. Although it took a little longer to break in compared to a neoprene liner, I find that the fit is more consistent throughout the day. I rarely change the buckling whereas I generally have to tighten the buckles as the day goes on.

I have a Workhorse liner in a S Pro Alpha 120. At first, I was not used to how stiff the combination is (I'm coming from a hybrid touring boot that has probably gotten too soft over my constant use in 5+ seasons). I might have also overtightened my buckles as the liner is a lot thicker than stock. Fortunately, my boot buckles could be extended further and that helped a lot. I'm still getting used to the shell/liner combination but I notice my feet doesn't get as tired after skiing vs. my old setup, presumably because my feet are not swimming around in a packed out liner anymore. I also added a spoiler as I felt the Workhorse made me stand a little too upright. The spoiler is held in place by some small pieces of velcro I stuck onto the black "plastic" parts of the liner and further secured by wrapping the Zipfit strap around the spoiler. Overall it has been great and heel and locked in.

Love these so far. I have 17 days in them this season (purchased late season). Paired with Nordica Promachines. They work exactly as everyone says. They create an excellent hold of the ankle and heel, and the cork is excellent for increasing precision and energy transfer while also being very comfortable overall. The Promachines are a couple seasons old, and I skiied the stock liner, which is great. However, it was on its way out and I wanted to replace with a Zipfit for the long-term, so I chose the Workhorse because I like the use of leather (reminded me of my hockey skates, which like ski boots, require a precise fit). My Promachines fit great out of the box and required no mods. However, I did have to mod the shell slightly after moving to the Zipfit. The seam on the Zipfit between the leather and neoprene goes right over the end of the bone on the very outside of the foot right before the step down to the heel region (just up from the instep buckle line on the lower shell). This is the only spot on my foot that has a very slight protrusion. It was not a problem with the stock liner because the seam on it was in a different spot and used less volume there to fit in the unmodified shell comfortably. However, the Zipfit put just enough extra volume in this area to make it a very uncomfortable hot spot for me, which I didn't realize until I actually started skiing them (thought break-in might solve, but no). I solved this by simply heating the shell with a heat gun in just this region and pushing it out a bit by hand with a leather ski glove on. Only needed a little bit, any more would have required a punch tool at a shop (like I said, fine prior to the zipfit so we are just talking about very small adjustments). After that, everything has been incredibly comfortable, warm, and precise. Skiing is great. I have been on a couple long inbounds bootpacks in Utah too, so walking is good. Love them all day. Looking forward to many years using these. Very happy with the investment. I am a 46-year old dad. My 16-year old daughter also has Zipfit Corsas this year paired with her Atomic Redster CS boots and she loves them too with one full season in them behind her now. She got her Corsas at the beginning of the season along with new boots. I got my Workhorses later in the season after seeing her experience, but just replaced the liner of my existing boot. Both the Workhorse and Corsa have leather interiors, so "World Cup step-in" (putting liner on outside the shell and then stepping into the shell) is recommended and probably necessary. This took me some getting used to, but was fine after the first couple times out. It is definitely not as easy for me as some people make it look with an effortless step into a race boot and no hands used. My daughter pretty much steps her Corsas right into her Redsters, but with my Promachines, I have to pry apart the shell over the instep pretty far to get in. I don't know how I would get these into a shell that uses BOA and I don't plan to find out. A little clutsy, but once in, they feel great. Getting out is the reverse, but goes much easier and does not require prying the instep. I just lean forward and push the back of the boot cuff. First few times doing this outside at the car is a pain, but you figure it out quickly. Overall, small price to pay for comfort, warmth, and most importantly, long-term precision of fit. My only regret is that I did not move to these sooner.

Have wide feet, dealt with uncomfortable boots the last 15 years. It’s like stepping into a pair of uggs. Can’t believe the improvement. Also performance is noticeable. Somehow both stiff/responsive and comfortable

5 days into wearing this liner and I no longer have thoughts of learning to snowboard next season. My heel is locked, the feel and control is incredible, and I’ve never been more comfortable. Thank you for making me love skiing again.

I originally had these in a set of Atomic Ultra Hawk XTD 120s, and they were game changing. I then decide to try the GFTs, as they would be lighter and better for touring. That was a good decision. These sat around until I decided to try putting them in my snowboard boots. They not only fit, but made the snowboard boots hold my foot like a glove. They also made them significantly stiffer overall, which was helpful. The boots are K2 Maysis with internal and external boa systems. This was as good an upgrade in SB boots as it is in ski boots! Another reason to get zip fits!

I ski 40-50 days per year. 20-30 as coach/instructor and the Workhorse liner is the best upgrade to my boots since... well... EVER! Had the, heat molded on Thursday, skied them a few hours the next day, Friday - felt good. Then put a full day in on Sunday and they are absolutely amazing. Very responsive, very comfortable (after a few hours of break-in) and toe box is SO nice and warm. Love the combination of leather and wool liner. I am a fan for life! Get some!!

Got the Workhorse, warmed it, fitted it, skied. This liner goes in my Nordica Unlimited 130. First day was still squishing out the fit. After that they skied like a dream. Still offers plenty of movement and comfort when in walk, trek mode. But turns the boot into a real alpine boot when all locked down. I love the comfort, the style, and the performance of this liner. It is a touch difficult to get in at first, but by day 5 it was going in pretty smooth.

These things are amazing. Over a decade of ski instructing and these liners have given me a feel of the snow that I didn’t think was possible. The responsiveness and fit, mind blowing. I have tried to switch back to stock liners and it feels like wearing clown shoes. I’ve put about 100 days into them and the only wear I’m seeing is a spot on a lace. Highly recommend these or any zipfit liners, I know I don’t want to ski in anything other than my Handmade Italian leather ski slippers.

I’ve only skied in them three days, but what a difference They’re not soft, but they are very comfortable and responsive.

Ski boot shell: Atomic Hawx ultra 120 Lower leg and foot volume: Chichen legs Skier type: intermediate-advanced Tl;dr. Amazing Heel retention is the best. With my old liners, i had to tighten my boots every 2-3 runs. Not anymore. I set my boots in the morning and i don't touch them for the hole day. Don't panic, if they don't feel amazing in your first day. They will break in and you will never want to ski without then ever again!

Once I figured out on how to correctly and quickly slip in the liner into the shell it was easy. The liner is providing an excellent snug fit and is SUPER COMFORTABLE, much better than the original liner that came with the boot initially. Even after being in the boot for over 8 hrs 4 X a week no complaints. Would recommend this liner to anyone that is wearing ski boots often and for several hrs. Great product.

Great fit can turn on a dime. Cuff could be higher volume. Very difficult to put on. Amazing once they are on

Ski boot shell: Crispi WC Tele 26.5 Lower leg and foot volume: normal, wide higher volume forefoot Skier type: Expert What works or doesn't work for me: Zipfit provides excellent feel and improved performance both in my telemark boots and alpine boots. Best skiing upgrade I have had in years. Noticeable performance over stock or intuition liners. Never going back.

Another great offering from Zipfit. While I've only had a handful of days in them so far, I think they are built even better than my previous Zipfits - if that's even possible. This is my 4th pair of liners from Zipfit. My first pair were the foam injected version back in the 90's. In 30 years, I've only worn out 3 Zipfit liners and I work on the hill logging over 70 days annually. Maybe not the best business model :-) but these things are bomber. And there is no comparison to the moldable cork filling. Hand down the best fitting liner you'll ever own. They may be expensive up front but are unquestionably the best value of anything else by leaps and bounds. The fellas that answer the phone are very knowledgeable and will help you pick the right liner for your foot and skiing style. Don't hesitate - get a pair now!!